Description
2.0 Meg Pinhole IP camera1/2.8" Progressive Scan CMOS, True WDR >120dB, H.265/H.264/MJPEG, 1920x1080/30fps, 2.8mm lens, Motion Detection, Network disconnect, alarm 2ch in/ 1 ch out, audio 1ch in/1 ch out, 31.2x31.2, Onvif , DC12V, iPac AI Enabled with Facial Recognition System
| SYSTEM | |
|---|---|
| Resolution | 2MP 1920(H)×1080(V) |
| Image Sensor | 1/2.8" Progressive CMOS |
| Min. Illumination | Color 0.1lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON |
| Shutter | 1/5 ~ 1/20000s |
| Slow shutter | Support |
| Lens | 2.1 mm H.FOV: 141° |
| F No. | F 2.1 ±5% |
| Day & Night | Manual |
| WDR | 120 dB |
| Video Compression | H.265/H.264 |
| Video bit rate | 8Kbps ~ 8Mbps |
| Triple Stream | yes |
| Frame Rate |
Mainstream (1-30fps optional) 1920x1080, 1280x960, 1280x720 Substeam 1280x720,640x480,320x240 Mobilestream 640x480, 320x240 |
| Image Settings: | Rotate mode, Saturation, Brightness, Contrast, Hue, Sharpness adjustable |
| BLC | Support |
| ROI | Support |
| Privacy Mask | Support |
| Video Analytics | Perimeter Intrusion Detection, Line Crossing Detection, Stationary Object Detection, Pedestrian Detection, Cross Counting, DEEP LEARNING:Face Detection, Face Recognition |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, HTTPS, FTP |
| System Compatibility | ONVIF (Profile S) |
| Interface | RJ45 10M / 100M Ethernet interface x1 |
| Led | NA |
| IR Range | NA |
| SD storage | no |
| Alarm Trigger | no |
| Audio | yes |
| Video Output | no |
| Reset Button | no |
| PoE | yes |
| Water Proof | no |
| Power Supply | DC 12V/POE |
| Consumption | ≤ 4W |
| Dimension | 38X42x25mm |
| Storage Temperature | -30～+60°C |
| Operating Temperature | -30～+55°C |